Mla Essay Format Documents
If your instructor has specific requirements for the format of your research paper, check them before preparing your final draft. When you submit your paper, be sure to keep a secure copy.
The most common formatting is presented in the sections below:
Except for the running head (see below), leave margins of one inch at the top and bottom and on both sides of the text. If you plan to submit a printout on paper larger than 8½ by 11 inches, do not print the text in an area greater than 6½ by 9 inches.
Always choose an easily readable typeface (e.g., Times New Roman) in which the regular type style contrasts clearly with the italic, and set it to a standard size (e.g., 12 points). Do not justify the lines of text at the right margin; turn off any automatic hyphenation feature in your writing program. Double-space the entire research paper, including quotations, notes, and the list of works cited. Indent the first line of a paragraph half an inch from the left margin. Indent set-off quotations half an inch as well (for examples, see 76–80 in the MLA Handbook). Leave one space after a period or other concluding punctuation mark, unless your instructor prefers two spaces.
Heading and Title
Beginning one inch from the top of the first page and flush with the left margin, type your name, your instructor’s name, the course number, and the date on separate lines, double-spacing the lines. On a new, double-spaced line, center the title (fig. 1). Do not italicize or underline your title, put it in quotation marks or boldface, or type it in all capital letters. Follow the rules for capitalization in the MLA Handbook (67–68), and italicize only the words that you would italicize in the text.
Do not use a period after your title or after any heading in the paper (e.g., Works Cited). Begin your text on a new, double-spaced line after the title, indenting the first line of the paragraph half an inch from the left margin.
A research paper does not normally need a title page, but if the paper is a group project, create a title page and list all the authors on it instead of in the header on page 1 of your essay. If your teacher requires a title page in lieu of or in addition to the header, format it according to the instructions you are given.
Running Head with Page Numbers
Number all pages consecutively throughout the research paper in the upper right-hand corner, half an inch from the top and flush with the right margin. Type your last name, followed by a space, before the page number (fig. 2). Do not use the abbreviation p. before the page number or add a period, a hyphen, or any other mark or symbol. Your writing program will probably allow you to create a running head of this kind that appears automatically on every page. Some teachers prefer that no running head appear on the first page. Follow your teacher’s preference.
Placement of the List of Works Cited
The list of works cited appears at the end of the paper, after any endnotes. Begin the list on a new page. The list contains the same running head as the main text. The page numbering in the running head continues uninterrupted throughout. For example, if the text of your research paper (including any endnotes) ends on page 10, the works-cited list begins on page 11. Center the title, Works Cited, an inch from the top of the page (fig. 3). (If the list contains only one entry, make the heading Work Cited.) Double-space between the title and the first entry. Begin each entry flush with the left margin; if an entry runs more than one line, indent the subsequent line or lines half an inch from the left margin. This format is sometimes called hanging indention, and you can set your writing program to create it automatically for a group of paragraphs. Hanging indention makes alphabetical lists easier to use. Double-space the entire list. Continue it on as many pages as necessary.
Tables and Illustrations
Place tables and illustrations as close as possible to the parts of the text to which they relate. A table is usually labeled Table, given an arabic numeral, and titled. Type both label and title flush left on separate lines above the table, and capitalize them as titles (do not use all capital letters). Give the source of the table and any notes immediately below the table in a caption. To avoid confusion between notes to the text and notes to the table, designate notes to the table with lowercase letters rather than with numerals. Double-space throughout; use dividing lines as needed (fig. 4).
Any other type of illustrative visual material—for example, a photograph, map, line drawing, graph, or chart—should be labeled Figure (usually abbreviated Fig.), assigned an arabic numeral, and given a caption: “Fig. 1. Mary Cassatt, Mother and Child, Wichita Art Museum.” A label and caption ordinarily appear directly below the illustration and have the same one-inch margins as the text of the paper (fig. 5). If the caption of a table or illustration provides complete information about the source and the source is not cited in the text, no entry for the source in the works-cited list is necessary.
Musical illustrations are labeled Example (usually abbreviated Ex.), assigned an arabic numeral, and given a caption: “Ex. 1. Pyotr Ilich Tchaikovsky, Symphony no. 6 in B, opus 74 (Pathétique), finale.” A label and caption ordinarily appear directly below the example and have the same one-inch margins as the text of the paper (fig. 6).
Paper and Printing
If you print your paper, use only white, 8½-by-11-inch paper of good quality. If you lack 8½-by-11-inch paper, choose the closest size available. Use a high-quality printer. Some instructors prefer papers printed on a single side because they’re easier to read, but others allow printing on both sides as a means of conserving paper; follow your instructor’s preference.
Corrections and Insertions on Printouts
Proofread and correct your research paper carefully before submitting it. If you are checking a printout and find a mistake, reopen the document, make the appropriate revisions, and reprint the corrected page or pages. Be sure to save the changed file. Spelling checkers and usage checkers are helpful when used with caution. They do not find all errors and sometimes label correct material as erroneous. If your instructor permits corrections on the printout, write them neatly and legibly in ink directly above the lines involved, using carets (⁁) to indicate where they go. Do not use the margins or write a change below the line it affects. If corrections on any page are numerous or substantial, revise your document and reprint the page.
Binding a Printed Paper
Pages of a printed research paper may get misplaced or lost if they are left unattached or merely folded down at a corner. Although a plastic folder or some other kind of binder may seem an attractive finishing touch, most instructors find such devices a nuisance in reading and commenting on students’ work. Many prefer that a paper be secured with a simple paper or binder clip, which can be easily removed and restored. Others prefer the use of staples.
There are at present no commonly accepted standards for the electronic submission of research papers. If you are asked to submit your paper electronically, obtain from your teacher guidelines for formatting, mode of submission (e.g., by e-mail, on a Web site), and so forth and follow them closely.
Designed to be printed out and used in the classroom. From the MLA Handbook, 8th ed., published by the Modern Language Association.
0.1) If you’ve been asked to submit a paper in MLA style, your instructor is asking you to format the page and present the content in a specific way. Just as football referees dress a certain way, and Japanese chefs cook a certain way, writers in certain disciplines follow a certain set of conventions. This document will show you how to format an essay in MLA style.
For the most complete information, check your campus library or writing center for the MLA Handbook for Writers of Research Papers, 8th ed.
1. Document Settings
Your word processor comes with default settings (margin, line height, paragraph spacing, and typeface) that will likely need adjustment. For MLA style, you need:
|(Jump directly to instructions for adjusting MS-Word settings in Windows or Mac; or, skip ahead to 2) Page Header.)|
1.1 Adjusting Document Settings in MS-Word (Windows)
My copy of Microsoft Word for Windows defaults to
- 1-inch margins all around
- 1.15 line height
- 10pt spacing between paragraphs
- Calibri 11-point typeface.
Changing to MLA Style (Windows)
- The default margins in my test run were fine, but if you need to change them:
Page Layout -> Margins -> Normal (1-inch all around)
- The default line height is too low. Change it to 2.0.
Home -> Line Spacing -> 2.0.
(You could try fudging it to 1.9 or 2.1 to meet a page count, but any more than that and your instructor may notice.)
- The MS-Word default adds extra space after paragraphs.(MLA Style instead requires you to signal paragraph breaks by indenting the first line.)
CTRL-A (select all your text)
Home -> Line Spacing -> Remove Space After Paragraph
- Change the typeface to Times New Roman 12-point.
Home-> Font Face Selector (change to Times New Roman)
Home -> Font Size Selector (change to 12)
1.2 Adjusting Document Settings in MS-Word (Mac)
My copy of Microsoft Word for Mac defaults to
- 1.25 inch left and right margins, 1 inch top and bottom
- 1.0 line height
- no extra spacing after paragraphs
- Cambria 12-point typeface
Changing to MLA style (Mac)
- In my test run, the left and right margins are too big. To change them:
Layout -> Margins -> Normal (1-inch all around)
- The default line height is too low. Change it to 2.0.
Home -> Line Spacing -> 2.0
- My Mac copy of MS-Word does not add extra spaces after paragraphs. If yours does:
Home -> Line Spacing -> Line Spacing Options… (a new window will pop up)
Don’t add space between paragraphs of the same style (check this box) -> OK
- The 12-point Cambria will probably be fine, but to change the typeface:
Home -> Font Face Selector (change to Times New Roman)
Home -> Font Size Selector (change to 12)
2. Page Header
In the top right of every page, use your word processor’s “Page Header” function add an automatic page number and your surname.
2.1 Adding the Page Header in MS-Word (Windows)
- Insert -> Page Number -> Top of Page -> (choose the right-justified “Plain Number” option)
- The cursor will jump automatically to the right place for you to type your surname.
- Click anywhere in the body of the paper to exit the header area.
2.2 Adding the Page Header in MS-Word (Mac)
- Insert (in the top menu) -> Page Numbers… -> (Set “Position” to “Top of Page (header)” and “Alignment” to “Right”)
- Click just to the left of the new page number, and type your surname.
- On my test document, my name was too far over to the left; grab the triangular tab adjuster just above your name, and drag it a notch to the right.
3. Title Block
In the upper left corner, type your name, your instructor’s name, the course number and section, and today’s date. Centered on the next line, type an informative title that actually informs the reader of your main point (not just “English Paper” or “A Comparison between Hamlet and Macbeth”).
- Like all the other text in an MLA style paper, the title block is double-spaced.
- The title is in the same font as the rest of the paper — it is not boldface, or enlarged.
- There is no extra space above or below the title.
- A truly informative title will include the general topic, and your precise opinion on that topic. (So, if you pan to compare Hamlet and Macbeth, your title should state the unique point you want to make about Hamlet and Macbeth. Reuse part of your thesis statement.)
This handout presumes you already know why you should cite your sources (to establish your authority, to introduce persuasive evidence, to avoid plagiarism, etc.), These instructions focus on how you format the page. (For a resource to help you determine how to cite a specific source, see the MLA Bibliography Builder).
To fully cite a source requires two stages. The first happens in the body of your paper (the “in-text citation”) and the second happens on a separate page at the end of your paper (see “Works Cited List,” below.)
4.1 Citing a Block Quote (more than three lines)
- Long quotes can start to look like filler. Only use a block quote if you have a very good reason to include the whole passage. (You can usually make your point with a shorter quote.)
- If you do have a good reason to quote a passage that is several lines long:
- Select the text and click the “Increase Indent” icon (see image, right).
- Place the parenthetical citation (the author’s name and the page number) after the period. (This is different from inline quotes, below.)
- There is no comma between the author’s name and the page number.
- If the quotation runs across more than one page: (Wordsworth-Fuller 20-21) or (Wordsworth-Fuller 420-21).
- Skip wordy introductions such as, “In his informative guide The Amazing Writing Book, published by Elizabeth Mount College in 2010, the noted composition expert Maxwell Wordsworth-Fuller describes the importance of citations in MLA style papers.” Cutting the filler leaves more room to develop your own original ideas. (See “Integrating Quotations.”)
4.2 Citing an Inline Quotation
When the passage you want to quote is less than three lines long, use inline style. Here we have two brief passages, taken from the same page of the same source, so we can handle both with a single parenthetical citation.
- The parenthetical citation appears outside the quoted material.
- The period that ends the sentence comes after the close parenthesis. (This is different from block quotes, above.)
- In this example, we have changed the first word a little, lowercasing it in order to fit it into our own sentence. To let the reader know what we changed, we put  around it.
- Again, note the absence of a full sentence that explains who Wordsworth-Fuller is and where the quote comes from. All that info will be in the Works Cited list, so we leave it out of the body of the paper.
4.3 Citing a Paraphrase
Let’s imagine we want to reference Wordsworth-Fuller’s general idea about citation as a way to establish credibility, but we don’t need to include any of the technical details. We can save space, and make it much easier on our reader, if we paraphrase:
- Use paraphrasing for variety, or to make a passing reference without taking up much space.
- If we use an author’s idea, rephrased in our own words, we must still cite the idea.
5. Works Cited List
A research paper isn’t a research paper unless you end with full bibliographical details on every source you cited. This part can be tedious and tricky; leave yourself plenty of time to do it.
- Start a new page.
- MS-Word Wind: Insert -> Page Break -> New Page.
- MS-Word Mac: Document Elements -> Break -> Page.
- Title your new page: Works Cited
MLA style calls for no extra spaces above or below the page title; no special formatting.
5.1. How to Create an Individual Works Cited Entry
Exactly what goes into each item in your bibliography depends on what kind of item it is. The following pages give you some questions to answer, then let you push a button to get an individual works-cited entry.
MLA-Style Bibliography Builder: Create Works Cited Entries by Filling in a Form
- Article (in a periodical, or chapter; printed or electronic)
- Book (printed or electronic)
- Web Page (corporate web page, blog entry, YouTube video, etc.)
If you prefer a more narrative explanation, see Purdue OWL’s handouts for how to create a bibliography entry for a book, an article in a periodical (such as a journal or newspaper), or an electronic source (such as an email, web page or a YouTube clip). See also this list of other common sources (such as a personal interview or a movie).
5.2. How to Organize Your Works Cited list
Sort the entries alphabetically by the author‘s last name.
- If the author is an organization (such as a government agency or non-profit foundation), alphabetize according to the name of the organization.
- If you are citing a painting, or a composer, then obviously “author” has to be interpreted a little loosely.
- Unless your instructor ask you to organize your Works Cited list differently, everything should be alphabetized together, in a single list. MLA does not require that you separate works of different kinds, or that you cite works in the order that they appeared in your paper, or that you write annotations to go along with each item.
- Use double-spaced line height. (in my copy of Word, I select the text and choose Format -> Paragraph -> Line spacing -> Double -> OK.)
- Use hanging indent paragraph format. (In my copy of word, I select the text then choose Format -> Paragraph -> Indentation -> Special -> Hanging Indent.)
29 May 2011 — new document posted, replacing outdated handout written in 1999.
06 Jun 2011 — expanded section on organizing the Works Cited list, since several readers asked for clarification.
07 Jun 2011 — reorganized for emphasis
19 Apr 2012 — added numbers to more subheads
24 Mar 2014 — added details on Works Cited paragraph formatting.
02 Oct 2016 — updated with MLA 8th Edition details.
30 Nov 2016 — added annotated Works Cited sample image.
Related Writing Links
|Dennis G. Jerz|
Researched Papers: Using Quotations Effectively
If your college instructor wants you to cite every fact or opinion you find in an outside source, how do you make room for your own opinion? Paraphrase, quote selectively, and avoid summary.Dennis G. Jerz
MLA Works Cited Citation Builder
Choose a form, fill it out, and push the button… you will get an individual entry for a “Works Cited” page, which you may then copy and paste into your word processor. The BibBuilder is more like a guide than a full-fledged utility, but you may nevertheless find it helpful.
|Jerz’s Literacy Weblog|